|
Post by barrycygnetbus on Nov 1, 2010 14:10:40 GMT
Hi Just find this site while looking for something else. Not tried building one yet. pwfpaperbuses.fotopic.net Hope it may interest someone
|
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 1, 2010 16:14:48 GMT
just tried printing one but its only doing half the bus? is there something you need to do?
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 1, 2010 16:52:08 GMT
sorted! just have to save it then rotate! pics up soon of my paper fleet
thanks again Barry
|
|
|
|
Post by cheifgaz on Nov 1, 2010 20:07:37 GMT
Thanks barry they make good decals for my models the wright badges and destinations etc
|
|
|
|
Post by barrycygnetbus on Nov 1, 2010 20:35:16 GMT
Your welcome, when i get 2 minutes i will print one and try making it. Good tip Cheifgaz regarding Wright Badges and destinations etc, i had not thought of that.
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 1, 2010 22:15:00 GMT
Here is my attempt at YN07KRG and here are D490OWE and G616NWA printed quite a few off including some B10BLE and a YTC Metrobus and powels Scania Alexander PS, will upload more when completed ;D thanks again Barry, great internet find!
|
|
|
|
Post by barrycygnetbus on Nov 2, 2010 9:00:39 GMT
Hi Andy
What are they like to build?. Will have a go at some of the Lincolnshire ones later.
Barry
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 2, 2010 9:07:10 GMT
Hi Andy What are they like to build?. Will have a go at some of the Lincolnshire ones later. Barry they are a bit fiddly Barry, I found it easier to glue the paper to some thin card to give it more strength. just remember to leave some glueing edges where you stick the sides together! get some pics up when you have done some Andy
|
|
|
|
Post by junesboy on Nov 2, 2010 21:38:16 GMT
andyrad wrote
"I found it easier to glue the paper to some thin card to give it more strength. just remember to leave some glueing edges where you stick the sides together!"
Another way is print on glossy photo paper and get a new shiney look and use sellotape inside the corners for a neat looking finish
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 3, 2010 9:11:24 GMT
andyrad wrote "I found it easier to glue the paper to some thin card to give it more strength. just remember to leave some glueing edges where you stick the sides together!" Another way is print on glossy photo paper and get a new shiney look and use sellotape inside the corners for a neat looking finish yeah that could work too, might give one of those a try
|
|
|
andyrad
Traffic Manager
Posts: 1,411
|
Post by andyrad on Nov 3, 2010 23:22:17 GMT
Just made some more.. B10M Levante National Express.. and done the rear window on 2490... getting quite a fleet now!
|
|
|
|