|
|
Post by tofskilemons on Feb 7, 2013 17:06:04 GMT
Right, after searching for a few days on the internet and on here I've stuck a dead, so come to ask the experts (you lot). I'm involved in a college project where I need to research seats - chosen to do seats on public transport. So far, I've contacted Lezzerini about the Practico's that Stagecoach use, but had nothing back.
What I'm wondering is if anyone has any contact details for the people that make the Linea 200 (as used by First) and the Civic (?) Used by newer First vehicles.
If anyone has anything such as dimensions or drawings that'd be really handy, but if I could get into contact with the manufacturers that would be also great.
Thanks in advance to anyone!
|
 |
|
|
|
Post by thrybergh on Feb 7, 2013 17:34:29 GMT
Right, after searching for a few days on the internet and on here I've stuck a dead, so come to ask the experts (you lot). I'm involved in a college project where I need to research seats - chosen to do seats on public transport. So far, I've contacted Lezzerini about the Practico's that Stagecoach use, but had nothing back. What I'm wondering is if anyone has any contact details for the people that make the Linea 200 (as used by First) and the Civic (?) Used by newer First vehicles. If anyone has anything such as dimensions or drawings that'd be really handy, but if I could get into contact with the manufacturers that would be also great. Thanks in advance to anyone! Esteban Linea 200 seats are not produced anymore I believe, having been replaced with the Arriva London standard; the Esteban Ciclo. I've attached a couple of PDF documents of the seating measurements etc. for you. I've only attached the Civic V0 seating - not sure whether you wanted V0/2/3? Ciclo_cotas.pdf (388.86 KB) |
|
|
|
|
Post by thrybergh on Feb 7, 2013 17:35:45 GMT
|
|
|
|
|
Post by tofskilemons on Feb 7, 2013 18:35:47 GMT
Right, after searching for a few days on the internet and on here I've stuck a dead, so come to ask the experts (you lot). I'm involved in a college project where I need to research seats - chosen to do seats on public transport. So far, I've contacted Lezzerini about the Practico's that Stagecoach use, but had nothing back. What I'm wondering is if anyone has any contact details for the people that make the Linea 200 (as used by First) and the Civic (?) Used by newer First vehicles. If anyone has anything such as dimensions or drawings that'd be really handy, but if I could get into contact with the manufacturers that would be also great. Thanks in advance to anyone! Esteban Linea 200 seats are not produced anymore I believe, having been replaced with the Arriva London standard; the Esteban Ciclo. I've attached a couple of PDF documents of the seating measurements etc. for you. I've only attached the Civic V0 seating - not sure whether you wanted V0/2/3? View Attachment Thanks very much for those, exactly what I was looking for  if you have the ones for Civic V3 then that'd be brilliant - or V2 (whichever ones are on the Sheffield Gemini's). Thanks again! |
|
|
|
|
Post by thrybergh on Feb 8, 2013 18:14:08 GMT
Good to hear and the standard with First is the Civic V2 at the moment (excluding the new vehicles arriving into Leeds/Manchester etc). Civic_V2_cotas.pdf (711.6 KB) |
|
|
|
|
Post by tofskilemons on May 16, 2013 12:16:42 GMT
Good to hear and the standard with First is the Civic V2 at the moment (excluding the new vehicles arriving into Leeds/Manchester etc). View AttachmentHi there Thrybergh, I don't suppose you have other drawings in the bus body world? Looking for some dimensions for the rear end mainly of the Gemini 2. If anyone else could help that'd be really handy - looking to draw up a rear in CAD and 'print' it to use on the model of 37229 I'm doing at the moment. |
|
|
|
|
Post by thrybergh on May 21, 2013 19:59:54 GMT
Good to hear and the standard with First is the Civic V2 at the moment (excluding the new vehicles arriving into Leeds/Manchester etc). View AttachmentHi there Thrybergh, I don't suppose you have other drawings in the bus body world? Looking for some dimensions for the rear end mainly of the Gemini 2. If anyone else could help that'd be really handy - looking to draw up a rear in CAD and 'print' it to use on the model of 37229 I'm doing at the moment. Not on me no, sorry. You could try contacting Wright Bus directly via email? |
|
|
|
|
Post by doncasterdart on Jun 17, 2013 8:33:59 GMT
Is a paperbus any good?
|
|
|
|
|
Post by tofskilemons on Jun 18, 2013 20:07:49 GMT
If the dimensions are fairly correct for where stuff is on the rear, then I think so!  |
|
|
|
|
Post by markno16 on Jun 20, 2013 11:24:52 GMT
Hi,
I have attempted a B9 Gemini rear, although I make mine from eye, so I can't guarantee its accuracy.
I can either PM you or email?
|
|
|
|
|
Post by tofskilemons on Jun 20, 2013 18:40:18 GMT
Hi, I have attempted a B9 Gemini rear, although I make mine from eye, so I can't guarantee its accuracy. I can either PM you or email? Any guidance is better than what I have at the minute! My email is chris@lemmy.co.uk Thanks very much! |
|
|
if you have the ones for Civic V3 then that'd be brilliant - or V2 (whichever ones are on the Sheffield Gemini's). Thanks again!
